Scaleauto SC-7024 Mercedes Benz SLS AMG GT3 #23
Vodaphone BP Ultimate Team entry at the Jarama round of the Iber GT Championship
Has SC-1333 ball bearings around front and rear axles.
SC-0026 motor, 22,000 rpm and 310 g/cm torque at 12 volts.
Geared 12/44 with nylon pinion and nylon spur with aluminum hub.
We recommend SC-2421 sponge tires, glued, trued and ready to go, for racing on most surfaces. If you plan to use the stock rubber tires you will need to glue them to the wheels.
Listing of useful parts for the 1/24 Scaleauto cars
Medium compound rubber rear tires SC-4737
Soft compound rubber rear tires SC-4736
Glued & trued sponge front tires on lightweight aluminum wheels SC-2715P these wheels can easily be fitted with the stock wheel inserts
Glued & trued sponge rear tires on lightweight sluminum wheels SC-2121p(supersoft), SC-2621p(soft), SC-2421p (medium), SC-2521P (hard) these wheels can easily be fitted with the stock wheel inserts
Guide spacer SC-1623 As stock on the 1/24 scale cars the guide is set for NINCO track with it's raised rails, if you will be running on Carrera or a routed wood track then you will find you need to shim the guide down to get fully in the slot. Or, and this is what we recommend, you can shift the guide from it's position atop the chassis plate to the bottom of the chassis plate, this is easily done as just four small screws hold the guide holder in place. If you choose to shift the guide carrier below the chassis plate then you will also want SC-1626 guide, this guide is a 'low profile' version of the stock guide.